METODE FULL COSTING DAN COST PLUS DALAM HARGA JUAL USAHA MIKRO KECIL DAN MENENGAH

Authors

  • Gerlan Haha Nusa Universitas Jenderal Achmad Yani Yogyakarta
  • David Sulistiyantoro Universitas Jenderal Achmad Yani Yogyakarta
  • Puji Winar Cahyo Universitas Jenderal Achmad Yani Yogyakarta
  • Inna Zahara Universitas Jenderal Achmad Yani Yogyakarta
  • Arif Himawan Universitas Jenderal Achmad Yani Yogyakarta

DOI:

https://doi.org/10.31539/xcanpp60

Keywords:

MEMS Omah Pakis; Full Costing; Cost Plus; Selling Price.

Abstract

The problem faced by MSMEs is the lack of recording the costs incurred in determining prices. The aim of the research is for MSMEs to find out the cost of production using the full costing method and determine the desired profit using the cost-plus approach. With this determination, it is hoped that it can be used to make various decisions regarding selling prices. The research method used is descriptive qualitative to analyze the data. The research results show that the selling price of beverage products at full costing and cost-plus is lower than the price determined by Omah Pakis. Meanwhile, for food products, the full costing and cost-plus calculations are higher compared to the prices determined by Omah Pakis. The conclusion of this research is that costs are only charged to the elements of raw material and labor costs so that the information on determining selling prices is incomplete. As a result of incomplete cost information data being available, the decisions taken by the owner of Omah Pakis only focus on the short term. Omah Pakis can group production costs by determining the markup to determine the selling price using the cost-plus method.

 

References

Aulya, S., Ananda, S., Miftahani, W., & Suriyanti, L. H. (2022). ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DENGAN PENERAPAN METODE AKUNTANSI BIAYA PENUH PADA UMKM FANISA. Research In Accounting Journal, 2(5), 615–620. http://journal.yrpipku.com/index.php/raj

Badan Pusat Statistik. (2020). Berita Resmi Statistik: Indonesia Triwulan I-2020. Pertumbuhan Ekonomi Indonesia Triwulan I-2020 No. 39/05/Th. XXIII, 39, 1–12. https://www.bps.go.id/pressrelease/2020/02/05/1755/ekonomi-indonesia-2019-tumbuh-5-02-persen.html

Case, K. E., & Fair, R. C. (2006). PRINSIP-PRINSIP EKONOMI, edisi 8, jilid 1. Erlangga.

Cinthya, L. N., Larasanty, L., Animah, A., & Isnawati, I. (2019). ANALISIS PENENTUAN HARGA POKOK PRODUKSI PADA USAHA KECIL MENENGAH SENTRA PENGRAJIN BAMBU PADA UKM WAHANA BAMBU WILLIS GUNUNG SARI LOMBOK BARAT. JIAI (Jurnal Ilmiah Akuntansi Indonesia), 4(2), 89–106. https://doi.org/10.32528/jiai.v4i2.2657

Deprez, L., Antonio, K., & Boute, R. (2023). Empirical risk assessment of maintenance costs under full-service contracts. European Journal of Operational Research, 304(2), 476–493. https://doi.org/10.1016/j.ejor.2022.03.055

Diptyana, P. (2022). PENDAMPINGAN PENERAPAN SISTEM AKUNTANSI BIAYA. Jurnal Kemitraan Dan Pemberdayaan Masyarakat, II(2), 22–29. https://doi.org/10.14414/kedaymas.v2i2.2983

Fadli, I. N., & Ramayanti, R. (2020). ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI BERDASARKAN METODE FULL COSTING (STUDI KASUS PADA UKM DIGITAL PRINTING PRABU). Jurnal Akuntansi Kajian Ilmiah Akuntansi, 7(2), 148–161. https://doi.org/http://dx.doi.org/10.30656/jak.v7i2.2211 p-ISSN

Harefa, P. R. A., Zebua, S., & Bawamenewi, A. (2022). Analisis Biaya Produksi Dengan Menggunakan Metode Full Costing Dalam Perhitungan Harga Pokok Produksi. Jurnal Akuntansi, Manajemen Dan Ekonomi (JAMANE), 1(Vol. 1, No. 2), 218–223. https://doi.org/https://doi.org/10.56248/jamane.v1i2.36

Hasyim, R. (2019). Analisis Penentuan Harga Pokok Produksi Dan Harga Jual Dengan Menggunakan Metode Full Costing Pada Home Industry Khoiriyah Di Taman Sari, Singaraja. Jurnal Pendidikan Ekonomi Undiksha, 10(1), 65–75. https://doi.org/10.23887/jjpe.v10i1.20057

Herrera Diaz, M. A., Scouse, A., & Kelley, S. S. (2022a). Environmental full cost accounting of alternative materials used for railroad ties: Treated-wood and concrete case study. Journal of Cleaner Production, 364(November 2021), 132536. https://doi.org/10.1016/j.jclepro.2022.132536

Herrera Diaz, M. A., Scouse, A., & Kelley, S. S. (2022b). Environmental full cost accounting of alternative materials used for railroad ties: Treated-wood and concrete case study. Journal of Cleaner Production, 364(November 2021), 0–8. https://doi.org/10.1016/j.jclepro.2022.132536

Krassowska, T., Becker, J., Becker, A., & Ziemba, P. (2022). Multi-criteria evaluation of financial and accounting systems intended for small and medium-sized enterprises. Procedia Computer Science, 207, 3547–3556. https://doi.org/10.1016/j.procs.2022.09.414

Marone, E., Bertocci, M., Boncinelli, F., & Marinelli, N. (2017). The Cost of Making Wine: A Tuscan Case Study Based on a Full Cost Approach. Wine Economics and Policy, 6(2), 88–97. https://doi.org/10.1016/j.wep.2017.06.002

Meira, D., Lopes, I., & Pires, C. (2020). Selection of computerized maintenance management systems to meet organizations’ needs using AHP. Procedia Manufacturing, 51(2019), 1573–1580. https://doi.org/10.1016/j.promfg.2020.10.219

Melati, L. S. A., Saputra, G., Najiyah, F., & Asas, F. (2022). Perhitungan harga pokok produksi berdasarkan metode Full Costing untuk penetapan harag jual produk pada CV. Silvi MN Paradilla Parengan. Owner, 6(1), 632–647. https://doi.org/10.33395/owner.v6i1.611

Mulyana, W. F., & Wahyudi, A. (2022). Analisis Perhitungan Harga Pokok Produksi dengan Metode Full Costing pada UD. Madu Asli Sumbawa. Statera: Jurnal Akuntansi Dan Keuangan, 4(1), 71–78. https://doi.org/https//doi.org/10.33510/statera.2022.4.1.71-78

Nazim, M., Wali Mohammad, C., & Sadiq, M. (2022). A comparison between fuzzy AHP and fuzzy TOPSIS methods to software requirements selection. Alexandria Engineering Journal, 61(12), 10851–10870. https://doi.org/10.1016/j.aej.2022.04.005

Noviasari, E., & Alamsyah, R. (2020). Peranan Perhitungan Harga Pokok Produksi Pendekatan Full Costing Dalam Menentukan Harga Jual Dengan Metode Cost Plus Pricing. Jurnal Ilmiah Akuntansi Kesatuan, 8(1), 17–26. https://doi.org/10.37641/jiakes.v8i1.287

Nugraha, I. G. Y. A. P., & Masdiantini, P. R. (2023). Analisis Perhitungan Harga Pokok Produksi Menggunakan Metode Full Costing dalam Penentuan Harga Jual Udang Vaname di Tambak Lautan Abadi Gerokgak. Jurnal Ilmiah Akuntansi Dan Humanika, 13(2), 264–273.

Nurdilasari, S., Djadjuli, M., Tatmimah, I., Muzayyanah, & Indriyani, R. (2021). Determining The Cost Of Production In Selling Price With The Full Costing Method On MSME Sumpia Dua Udang. International Journal of Economics, Business and Accounting Research (IJEBAR), 5(3), 1272–1278. http://journals.synthesispublication.org/index.php/civitas

Nurhayati, I., Hariansyah, M., & Suharti, T. (2020). The Determination of the Main Production Cost of Jipang Cake Using the Full Costing Method. Jurnal Manajemen, 11(1), 26–34. https://doi.org/10.32832/jm-uika.v11i1.2607

Olivia, S. H., & Garcia, M. G. (2023). Investigating The Impact Of Variable Energy Prices And Renewable Generation On The Annualized Cost of Hydrogen. International Journal of Hydrogen Energy, 48(37), 13756–13766. https://doi.org/https://doi.org/10.1016/j.ijhydene.2022.12.304

Purnama, D., & Wawo, A. (2019). Harga Pokok Produksi Dalam Menentukan Harga Jual Melalui Metode Cost Plus Pricing Dengan Pendekatan Full Costing. JRAK: Jurnal Riset Akuntansi Dan Komputerisasi Akuntansi, 10(1), 119–132. https://www.researchgate.net/profile/Andi-Wawo/publication/333451917_Harga_Pokok_Produksi_Dalam_Menentukan_Harga_Jual_Melalui_Metode_Cost_Plus_Pricing_Dengan_Pendekatan_Full_Costing/links/624d4b15cf60536e23457aeb/Harga-Pokok-Produksi-Dalam-Menentukan-Harg

Purwanto, E., & Watini, S. S. (2020). ANALISIS HARGA POKOK PRODUKSI MENGGUNAKAN METODE FULL COSTING DALAM PENETAPAN HARGA JUAL (STUDI KASUS UNIT USAHA REGAR FRUIT). Journal of Applied Managerial Accounting, 4(2), 248–253. https://doi.org/10.30871/jama.v4i2.2402

Ratnasih, C., & Sulbahri, R. A. (2022). Full Costing Method Model and Variable Costing Method Against Cement Price Determination (Case in Indonesia). European Journal of Business and Management Research, 7(2), 284–288. https://doi.org/10.24018/ejbmr.2022.7.2.1378

Romney, M., Steinbart, P., Mula, J., McNamara, R., & Tonkin, T. (2012). Accounting Information Systems Australasian Edition. Pearson Higher Education AU.

Safitri, D. P., & Kristianti, I. (2022). Analisis perilaku Sticky Cost biaya produksi pada perusahaan BUMN sektor manufaktur periode 2014-2020. Owner, 6(2), 2059–2070. https://doi.org/10.33395/owner.v6i2.835

SARI, D. K. (2022). Kebermanfaatan Informasi Akuntansi Dalam Penentuan Biaya Produksi Pada Kilang Padi Pak Wawan Di Lansat Kandap Kabupaten Pasaman. In FAKULTAS EKONOMI UNIVERSITAS MUHAMMADIYAH SUMATERA BARAT.

Veisi, H., Deihimfard, R., Shahmohammadi, A., & Hydarzadeh, Y. (2022). Application of the analytic hierarchy process (AHP) in a multi-criteria selection of agricultural irrigation systems. Agricultural Water Management, 267, 107619. https://doi.org/10.1016/J.AGWAT.2022.107619

Zayed, L. M. M., & Sinha, D. R. (2019). EFFECTIVENESS OF ACCOUNTING INFORMATION SYSTEM IN MANUFACTURING SMEs IN JORDAN - A REVIEW OF LITERATURE. International Journal of Social Science and Economic Research, 04(02), 819–825.

Downloads

Published

2026-01-08